Autool SDT-206 Smoke Leak Detector Automotive Diagnostic

XY552

New product

Autool SDT-206 Car Smoke Machine is designed for detecting the leakage of pipe systems on cars, motorcycles,such as fuel pipe, air intake system and cooling tank.

More details

50 Items

$ 269.00

Data sheet

Tool BOXYes
Weight6kg

More info

Autool SDT-206 Smoke Leak Detector Automotive Diagnostic

Autool SDT-206  Car Smoke Machine is designed for detecting the leakage of pipe systems on cars, motorcycles,such as fuel pipe, air intake system and cooling tank.

Autool SDT-206 is for all pipe systems, including EVAP.

Autool SDT-206 Smoke Leak Detector Main Unit

EVAP is a fuel evaporation control system used to collect and deal with fuel vapor, to prevent fuel vapor leakage. If the leak will pollute the atmosphere and even cause the vehicle to spontaneous combustion.

Plus this set of accessories can detect the smoke of the EVAP system, check whether there is leakage, broken, enhanced traffic safety.




Cautions:

1.When you use this detector the first time, please fill 20-30ml oil, not beyond this range.

2.New oil can be filled with only when the smoke is light, and it can’t be filled over 15ml every time.

3.Before filling new oil, please pour out the remaining oil in the detector.

4.Please replace the detector oil regularly.

 

 

Product Information

Power: DC12V, vehicle battery

Smoke output value: 6l/min

Built-in air supply

Controllable flow value



Autool Smoke Leak Detector

How to use:

1.Open the engine cover, and hang the detector in the cover.

2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle.Please secure the other side with a rubber stopple.

3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.

4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.

5.Turn on the power switch, and detector starts to work.

6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

7.After leak detection, please connect well the wires and pipe.

 

 

Notes:

* Please do leak detection away from smoke-sensitive parts.

* Do not run the detector over 8 minutes. It needs interval rest.

* The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.

* The round parts of this detector is with temperature, be careful to avoid scalding injury.

 

 

Maintenance

With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly.

1.Before filling new oil, please pour out the remaining oil in the detector.

2.When the smoke output has water drops, please replace with new oil.

3.Liquid paraffin and baby oil are OK.

4.Please fill new oil with equipped oil bottle

 

 

How to connect the smoke tube:

Autool SDT-206 Smoke Tube Connection


Packing List:

1pc * Main Unit

1pc * Hook (with hand-tighten nuts)

1pc * Cone Adapter

1pc * Universal Intake Adapter

1pc * EVAP Kit

1pc * Smoke Tube

1pc * Power Cords

1pc * Cap Topper (set)

1pc * Solid Stopples

1pc * Oil Bottle

1pc * User manual

Autool SDT-206 Smoke Leak Detector

Autool SDT-206 Smoke Leak Detector Accessories

Reviews

No customer reviews for the moment.

Write a review

Autool SDT-206 Smoke Leak Detector Automotive Diagnostic

Autool SDT-206 Smoke Leak Detector Automotive Diagnostic

Autool SDT-206 Car Smoke Machine is designed for detecting the leakage of pipe systems on cars, motorcycles,such as fuel pipe, air intake system and cooling tank.