Autool SDT-106 Smoke Leak Detector Automotive Diagnostic

XY551

New product

Autool SDT-106 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.

More details

50 Items

$ 159.00

Data sheet

Tool BOXYes
Weight4kg

More info

Autool SDT-106 Smoke Leak Detector Automotive Diagnostic

Autool SDT-106 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.

Autool SDT-106 is for all pipe systems, including EVAP.

Autool SDT-106 Smoke Leak Detector Main Unit

EVAP is a fuel evaporation control system used to collect and deal with fuel vapor, to prevent fuel vapor leakage. If the leak will pollute the atmosphere and even cause the vehicle to spontaneous combustion.
Plus this set of accessories can detect the smoke of the EVAP system, check whether there is leakage, broken, enhanced traffic safety.


Working principle:
create smoke through the equipment and sent smoke to sealed car pipeline system
(Such as air intake systems, exhaust systems, fuel systems, air conditioning systems, etc.)
Where there is smoke in the pipeline, there is a leak
With smoke detectors to check the car pipeline, will not have impact on the car system.


Cautions:
1.When you use this detector the first time, please fill 20-30ml oil, not beyond this range.
2.New oil can be filled with only when the smoke is light, and it can’t be filled over 15ml every time.
3.Before filling new oil, please pour out the remaining oil in the detector.
4.Please replace the detector oil regularly.

Autool Smoke Leak Detector

Product Information:
Power: DC12V, vehicle battery
Smoke output value: 6l/min
Built-in air supply


How to use:
1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle.
Please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch, and detector starts to work.
6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
7.After leak detection, please connect well the wires and pipe.


Notes:
* Please do leak detection away from smoke-sensitive parts.
* Do not run the detector over 8 minutes. It needs interval rest.
* The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. 
* The round parts of this detector is with temperature, be careful to avoid scalding injury.


Packing List:
1pc * Main Unit
1pc * Hook 
1pc * Cone Intake Adapter
1pc * Power Cords
1pc * Oil Bottle
1pc * Smoke Tube
1pc * EVAP Kit
1pc * User manual
1set * Solid Stopples

Autool SDT-106 Smoke Leak Detector Accessories

Autool SDT-106 Smoke Leak Detector

Reviews

No customer reviews for the moment.

Write a review

Autool SDT-106 Smoke Leak Detector Automotive Diagnostic

Autool SDT-106 Smoke Leak Detector Automotive Diagnostic

Autool SDT-106 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.