BMW iCOM Software 2017-08 Win7 32Bit OS 320GB HDD

BMW ICOM SOFTWARE 2017-08 ISTAD 4.06.31 ISTAP 3.62.3.002 IS READY

BMW iCOM Software 2017-08 ( ISTA/D 4.06.31 ISTA/P 3.62.3.002 ) is released today, we install the software based on Win7 32 bit OS. All software works perfect and fast.

It is on 320GB HDD, can fit all laptops which accept 2.5 inch SATA HDD.

Software includes: 

ISTA-D 4.06.31 (For Diagnostic, 08/2017)

ISTA-P 3.62.3.002 (For Programming 08/2017)

iToolRadar

Teamviewer (For remote control)

Attention: We only offer technology support for these 4 software, not help to work with others, thanks.

We can add the BMW ICOM Expert Mode (Enginner mode for single module programming) if you need, it is 99USD,please order it here:

http://www.x431.us/index.php?id_product=1104&controller=product&id_lang=1

Vehicle List:

 ISTA/D: Cars, Mini, Motorcycles, Rolls Royce, BMW i Series, BMW Compagna Motors

 ISTA/P: BMW / BMW Motorcycle / BMW i / BMW Mini / Rolls-Royce / BMW UX

The software languages we provide as below (software including ISTA/D, ISTA/P, We offer English as default, other language will cost 50USD more):

Chinese (中文)
Dutch (Nederlands)
English GB
English US
French (Français)
German (Deutsch)
Russian (Русский язык)
Greek (Ελληνικά)
Italian (Italiano)
Japanese (日本語)
Korean (한국의)
Portugese (Português)
Spanish (Español)
Swedish (Svenska)
Thai

Requirements of the laptops for this ICOM Software HDD: 

Make sure your laptop  CPU at least T7500 and the  RAM should be 2 GB or above , to ensure the software run moothly, if your laptop can not reach this configuration, the software will be not able to run.

ICOM Software HDD Packing List:

1pc * 320GB HDD

1pc * USB Key 

BMW ICOM SSD 2017-08 ISTAD 4.06.31 ISTAP 3.62.3.002 IS READY

BMW iCOM SSD 2017-08 ( ISTA/D 4.06.31 ISTA/P 3.62.3.002 ) is released today, we install the software based on Win7 32 bit OS. All software works perfect and fast.

It is 256GB SSD, run faster than normal HDD, can fit all laptops which accept 2.5 inch SATA HDD.

Software includes: 

ISTA-D 4.06.31 (For Diagnostic, 08/2017

ISTA-P 3.62.3.002 (For Programming 08/2017)

iToolRadar

Teamviewer (For remote control)

Attention: We only offer technology support for these 4 software, not help to work with others, thanks.

Addtional software: We can also add BMW ICOM Expert mode extra (Enginner mode for single module programming), it is 99USD, you can check here: ICOM Expert Mode

Vehicle List:

 ISTA/D: Cars, Mini, Motorcycles, Rolls Royce, BMW i Series, BMW Compagna Motors

 ISTA/P: BMW / BMW Motorcycle / BMW i / BMW Mini / Rolls-Royce / BMW UX

The software languages we provide as below (software including ISTA/D, ISTA/P, We offer English as default, other language will cost 50USD more):

Chinese (中文)
Dutch (Nederlands) 
English GB 
English US 
French (Français)
German (Deutsch)
Russian (Русский язык)
Greek (Ελληνικά)
Italian (Italiano)
Japanese (日本語)
Korean (한국의)
Portugese (Português)
Spanish (Español)
Swedish (Svenska)
Thai

Requirements of the laptops for this ICOM Software HDD: 

Make sure your laptop  CPU at least T7500 and the  RAM should be 2 GB or above , to ensure the software run moothly, if your laptop can not reach this configuration, the software will be not able to run.

Packing List:

1pc * 256GB SSD

1pc * USB Key 

With the iCOM Software HDD, you can work with BMW ICOM NEXT, BMW ICOM A2, BMW ICOM A1, also you can use BMW INPA K+DCAN cable, BMW Enet cable.