MST-1000 Ignition Tester MASTER Automobile Motor Igniting Signal Tool MST1000

XY253

New product

Split-free, wire-free, contact-free, probe close to the high-voltage wire to directly detect ignition signal.

More details

50 Items

$ 139.00

Data sheet

UpgradeNo
Tech SupportNo
Package26cm*17cm*9cm ( Inch:10.21*6.68*3.53 )

More info

MST-1000 Ignition Tester MASTER Automobile Motor Igniting Signal Tool MST1000

MST-1000 Ignition Tester Split-free, wire-free, contact-free, probe close to the high-voltage wire to directly detect ignition signal.

You can check MST-1000 Manual.pdf for more details

Measure the ignition timing on the ignition signal (MS).
Measure the voltage on the ignition signal (KV).
Measure engine RPM.

Attention: This item need 1×9 Volt alkaline battery to work, and in our package, we dont offer battery, please buy battery in your local place.

Like pic below:

MST-1000 Ignition Tester Battery

Master MST-1000 Ignition Tester Description:

1) capacitive pick-up
2) Flexible probe
3) LCD Display
4) Power ON/OFF/Reset button
5) Ignition System button
6) Engine Cycles button
7) Main Function/ calibrate button
8) Secondary Function/capture button
9) Main display
10) Function/measurement units
11) Secondary display B
12) Secondary display A
13) Ignition
14) Number of cycles
15) Low battery indicator
16) Spark detected

Instrument Description for MST-1000 Ignition Tester

Master MST-1000 Ignition Tester Functions:

1. Minimum and Maximum functions (for COP and SPW modes)
The MST-1000 maintains a continuous record of the minimum and maximum readings of the function currently selected.
To display the Minimum and Maximum readings of the main display, if not already selected press ' secondary function / capture ' button momentarily.
To reset the Minimum and Maximum readings, press the ' power on /off/ reset ' button momentarily. These values are also reset when turning the unit on.

Note: For the tachomenter function ( RPM) all Minimum and Maximum reading on the secondary displays are shown with the last digit rounded to '0'.

2. Spark Kvolt calibration function ( for COP mode only)

The MST-1000 requires the user to calibrate the instrument in order to measure spark Kvolt in coil on plug and coil near plug ignition systems. This calibration uses the measurement values obtained during the procedure to find the optimal measuring parameters or a particular type of ignition module , and compensates for differences in wave form and signal strength.
Once the MST-1000 has been calibrated on one of the ignition modules of the engine being diagnosed, all the subsequent measurement of spark Kvolt will be relative to the calibration value.
To calibrate the MST-1000, follow the procedure as described in ' 3.4.2 Measureing coil on plug and coil near plug ignition systems '.

Package including:

1pc x The host
1pc x Color box
1pc x The cloth
1pc x CD

MST-1000 Ignition Tester Whole Package

Reviews

No customer reviews for the moment.

Write a review

MST-1000 Ignition Tester MASTER Automobile Motor Igniting Signal Tool MST1000

MST-1000 Ignition Tester MASTER Automobile Motor Igniting Signal Tool MST1000

Split-free, wire-free, contact-free, probe close to the high-voltage wire to directly detect ignition signal.

Download