BMW CAS4 R270 Plus BDM Programmer V1.2

BMW CAS4 R270 Plus BDM Programmer

BMW CAS4 r270 plus can directly read and write chip data quickly and safely, support  the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data,safe and effective.

Software Version: 1.2

Supported BMW Car Model Year: Most 2001-2009

BMW CAS4 r270 plus includes all the features of CAS3 programmer. It has a powerful Motorola MCU programming function: removing-free programm Motorola MCU EEPROM (HC908) and FLASH (HC912, HC9S12, HC9S12X) series.

Function:

1.Support BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.)
2.Support BMW EWS4 (2L86D)
3.Support Benz EZS (1J35D/2J74Y/4J74Y/3K91D/1L85D/1L59W/3L40K/4L 40K, etc.)
4.Supports a variety of SRS modules:(9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K7 9X/5H55W, etc.)
5.Support the M35080 series of quick clear, read and write (35080/35080-V6/35080-VP/D80 D0WQ/D160/35160, etc.)
6.Applicable to all kinds of EIS/CAS/SRS/ECU automotive modules.

Package List:

1x BMW CAS4 R270 plus main unit
1x 26pin cable
1x AC Adapter
1x USB Cable
1x Adapter
1x CD drive

Question:
I bought a R270 to program a M35080v6 eeprom, the tool show:
Read m35080v6.......... Send command to R270......wait.....
Send setting to device.................... For 30 minutes and it cannot read the mileage data.

Answer:
As the product description in our website, R270 supports the M35080 series of quick clear, read and write (35080/35080-V6/35080-VP/D80 D0WQ/D160/35160, etc.). Therefore, if you fail to use R270 to work with M35080 eeprom, firstly you have to remove M35080 chip and then plug it into the IC socket, this IC socket is designed for M35080 eeprom. Beside, you need to check if it is well-welded with the board? If not well-welded, it means poor communication,then it can’t clear and read the mileage data quickly.